Product cut to dimension +/- 1% at 50% RH

Larger sizes, quantities, and technical information available per request!

[divilifeshortcode id=’2309′]

EW 1100

Product cut to dimension +/- 1% at 50% RH

Larger sizes, quantities, and technical information available per request!

[divilifeshortcode id=’2309′]

EW 1100

Product cut to dimension +/- 1% at 50% RH

Larger sizes, quantities, and technical information available per request!

[divilifeshortcode id=’2309′]

[divilifeshortcode id=’2342′]

• Teflon Fabric Reinforced

• perfluorosulfonic acid cation exchange membrane combining outstanding chemical resistance with a strong polytetrafluoroethylene fiber reinforcement

• may be used for chloroalkali production and a variety of electrolytic processes

• Product cut to dimension +/- 1% at 50% RH*

Performance Laboratory Cell (45 cm² active area)**

• Membrane Type: N-424

• Cell Voltage (V): 3.74

• Current Efficiency (%): 97

• NaOH (%): 2

Form

• Nafion™ N-424 is shipped in the “DRY” H+ form. “DRY” H+ membranes require simple pre-treatment in alkaline water. Refer to Nafion™ Technical Bulletin No. 93-01 for “DRY” H+ membrane pre-treatment.

To ensure optimum performance of Nafion™ N-424 in a commercial electrolyzer, please contact Ion Power, Inc.

Note: The side marked CATH must be installed facing the cathode, otherwise, the membranes will be irreversibly damaged in use.

**Conditions: 3 mm gap, DSA anode, steel cathode, 90 deg. C

Larger sizes, quantities, and technical information available per request!

[divilifeshortcode id=’2342′]

• is a new product in the 400 series family

• has a new PTFE monofilament reinforcement with high strength but flatter profile than Nafion™ N424

• It is also expected that edge leakage will be reduced and expansion characteristics will be more uniform

• represents the state-of-the art in fabric reinforced cation exchange membranes

Membrane Type: N438

Product cut to dimension +/- 1% at 50% RH*

Form:

• Nafion™ N438 is shipped in the “DRY” H+ form. “DRY” H+ membranes require simple pre-treatment in alkaline water. Refer to Nafion™ Technical Bulletin No. 93-01 for “DRY” H+ membrane pre-treatment.

Technical Information available upon request.

To ensure optimum performance of Nafion™ N438 in a commercial electrolyzer, please contact Ion Power, GmbH.

Note: The side marked CATH must be installed facing the cathode, otherwise, the membranes will be irreversibly damaged in use.

Larger sizes, quantities, and technical information available per request!

[divilifeshortcode id=’2342′]